home *** CD-ROM | disk | FTP | other *** search
/ Maclife 13 / MACLIFE13-No-93-1996.ISO.7z / MACLIFE13-No-93.ISO / FreeWare / ジャンル別紹介 / MG112UJ.LZH / MIDIGraphy 1.1.2 patch / MIDIGraphy 1.1.2 patch.rsrc / STR#_260.txt < prev    next >
Text File  |  1996-02-12  |  2KB  |  109 lines

  1. Drive isn窶冲 connected.
  2.  
  3. No disk in drive.
  4.  
  5. Disk is probably blank.
  6.  
  7. Can窶冲 find an address mark.
  8.  
  9. Read窶砺erify failed.
  10.  
  11. Bad address mark (badCksmErr).
  12.  
  13. Bad address mark (badBtSlpErr).
  14.  
  15. Can窶冲 find a data mark.
  16.  
  17. Bad data mark (badDCksum).
  18.  
  19. Bad data mark (badDBtSlp).
  20.  
  21. Write underrun occurred.
  22.  
  23. Drive error (cantStepErr).
  24.  
  25. Can窶冲 find track 0.
  26.  
  27. Can窶冲 initialize disk controller chip.
  28.  
  29. Tried to read side 2 of a disk in a single窶都ided drive.
  30.  
  31. Can窶冲 correctly adjust disk speed.
  32.  
  33. Drive error (seekErr).
  34.  
  35. Can窶冲 find sector.
  36.  
  37.  
  38.  
  39.  
  40.  
  41.  
  42.  
  43. Unable to read clock.
  44.  
  45. Time written did not verify.
  46.  
  47. Parameter RAM written did not verify.
  48.  
  49. Validity status is not $A8.
  50.  
  51.  
  52.  
  53.  
  54.  
  55. DDP socket error: socket already active; not a well窶徒nown socket; socket table full; all dynamic socket numbers in use.
  56.  
  57. DDP datagram or ALAP data length too big.
  58.  
  59. No bridge found.
  60.  
  61. ALAP error attaching/detaching ALAP protocol type:  attach error when ALAP protocol is negative, not in range, or already in table, or when table is full; detach error when ALAP protocol type isn窶冲 in table.
  62.  
  63. ALAP no CTS received after 32 RTS窶冱, or line sensed in use 32 times (not necessarily caused by collisions).
  64.  
  65.  
  66.  
  67. Driver Open error, port already in use.
  68.  
  69. Driver Open error, port not configured for this connection.
  70.  
  71. Operation on a read窶登nly zone.
  72.  
  73. Desk scrap isn窶冲 initialized.
  74.  
  75.  
  76.  
  77. No data of the requested type.
  78.  
  79.  
  80.  
  81.  
  82.  
  83.  
  84.  
  85.  
  86.  
  87.  
  88.  
  89. You have run out of memory. Try giving the application a larger heap zone with the Finder窶冱 窶廨et Info窶 command.
  90.  
  91. NIL master pointer.
  92.  
  93.  
  94.  
  95. Attempt to operate on a free block.
  96.  
  97. Attempt to purge a locked block.
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.  
  107. Block is locked.
  108.  
  109.